Evidence level: B
一句话:上一轮把「δ ≤ 67 km」判成「差 37.25 倍」是判读层错误——上界断言松了不等于错了;但顺着这个误判查下去,反而发现了一个真的错:C 档「δ ≥ 670 km」在它自己声明的 σ ≤ 10⁻⁴ 下根本不成立,差 37.25 倍,方向与上一轮说的正好相反。
本文件不是什么:不是 σ 测量报告,不是 Schumann 场模拟,不是对既有正文的修改(本文一字未改正文)。
本文件是什么:一次审计工具自身的纠错 + 一张可直接执行的更正表(等 JOE 批)。
一、问题从哪来:一个”看起来对”的 MISMATCH
上一轮(第 11 轮,#51 区间跨档审计器)交付时留了一个强结论:
schumann-station-candidate-tier-a-wet-basalt.md明写「A 档 σ ≥ 10⁻² → δ ≤ 67 km」。而 σ=10⁻² 在 7.83 Hz 的 δ 是 1.7986 km:67 / 1.7986 = 37.2508。
这个算术没错,但判读错了。因为原文写的是 δ ≤ 67 km——这是一个上界断言,它说的是「不会超过 67 km」。真值 1.7986 km 确实没有超过 67 km,所以这条断言成立,只是松(loose)。
把它判成「差 37.25 倍」相当于说「你说气温不超过 30 度,实测 12 度,所以你错了」——错的是这个判据,不是那句话。
旧工具的问题根源(delta-table-scan.py v1.1 第 290 行):parse_len() 用 ^\s*([+-]?\d+(?:\.\d+)?)\s*(mm|cm|km|m)\s*$ 匹配单元格,≤ 67 km 带前缀直接匹配失败 → 整格跳过。所以这两张表在旧工具下报「命中 0|断言 0」——它的沉默不是”没问题”,是”没看懂”。
二、判读层纠正:三类断言必须分开判
| 断言形式 | 语义 | 正确的判读 | 旧工具的处理 |
|---|---|---|---|
δ = 67 km |
等式,认为就是这个值 | 复算/声明 ∈ [0.5, 2] | ✅ 正确 |
δ ≤ 67 km |
上界,认为不超过这个值 | 复算/声明 ≤ 2(放宽 1 档) | ❌ 匹配失败→跳过 |
δ ≥ 670 km |
下界,认为不低于这个值 | 复算/声明 ≥ 0.5 | ❌ 匹配失败→跳过 |
delta-table-scan.py v1.2 把这三类分开:parse_len_ex() 保留比较符,judge() 按 cmp 分支判读(selftest 22/22 覆盖,含「上标负号 ⁻³ 不得被当区间分隔符」这条第 11 轮踩过的坑)。
三、纠正之后,真正的错浮出来了
修完判读,同一张表的五行重判:
| 档 | σ 声明 | δ 声明 | 断言类型 | 逐档最大 σ 下真值 | 判读 |
|---|---|---|---|---|---|
| A 档 | ≥ 10⁻² | ≤ 67 km | 上界 | 1.799 km | ✅ 成立(松 37.25×) |
| B 档 | 10⁻³–10⁻¹ | 几十米–几百米 | 区间(文字) | 568.8 m – 5.688 km | ⚠️ 上端低估 6.3× |
| C 档 | ≤ 10⁻⁴ | ≥ 670 km | 下界 | 17.99 km | ❌ 不成立,差 37.25× |
关键在第 3 行。C 档声明的 σ ≤ 10⁻⁴,在这个档内最大的 σ(10⁻⁴)给出的 δ 只有 17.986 km。而断言要求 δ ≥ 670 km。17.99 < 670,断言被自己的参数违背。
换句话说:
- 上一轮说「A 档 δ 被高估」(67 vs 1.8)——这句是误判,A 档的上界没被违背;
- 真正的错误在 C 档:它把 δ 写得比真值大 37.25 倍,而且是下界写法,所以是硬错。
- 37.25 这个数两次都对,但含义完全不同:
- A 档:上界比真值松 37.25 倍 → 无害(松的下界/上界不产生错误结论)
- C 档:声明值比真值高 37.25 倍 → 有害(”几乎透明”这个定性判断靠它撑着)
为什么 C 档这个错更危险
C 档的用途是「不启动 #24」,理由是「< 1 dB,几乎透明」。这个理由的物理链条是:δ ≥ 670 km ≫ 1 km 山体 → A(dB) = 8.686 × d/δ ≈ 8.686/670 ≈ 0.013 dB,确实几乎透明。
但按自己的 σ ≤ 10⁻⁴ 算,δ = 17.99 km,A(dB) = 8.686 × 1/17.99 ≈ 0.483 dB——仍然远小于 1 dB,结论方向不变(还是”不启动”)。所以:
错误是数值层面的,不是结论层面的。 这一点必须说清楚,否则会把”数值错”夸大成”整个模型错了”。
四、67 km / 670 km 到底是什么:三种候选解释,只有一种被证伪
37.25 倍这个数不随机。它的结构是 √1240 ≈ 35.2,或更干净地:1.7986 km × 37.25 = 67 km。上一轮的候选解释是「等效频率写错」:
若 σ=1e-2 且 δ=67 km → f = 0.005643 Hz(不是 7.83 Hz)
但这个解释对 C 档不成立。 检验:
| 候选解释 | A 档 (67 km) | C 档 (670 km) | 自洽? |
|---|---|---|---|
| ① 频率写错(应为 0.00564 Hz) | ✅ 0.00564 Hz 可给出 67 km | ❌ 需 0.0000564 Hz,与 A 档不同一频率 | ✗ |
| ② 单位混淆(km 当 m / m 当 km) | ❌ 67 m → σ 需 1e1 量级 | ❌ 670 m → σ 需 1e-2 | ✗ |
| ③ 抄一个「低频表」的数(如 1 Hz 或更低) | 见下 | 见下 | 待查 |
① 被证伪:同一个 37.25 倍同时出现在 A 档(67)和 C 档(670)上,而它俩的 σ 差 100 倍。若成因是”频率写错”,两处应给出不同的频率;但反推分别是 0.00564 Hz 与 0.0000564 Hz,相差 100 倍——不是一个统一的频率笔误。
② 被证伪:把 67 km 读成 67 m,反推 σ = 2/(ωμ·67²) ≈ 1.4×10¹ S/m,与 A 档 σ ≥ 10⁻² 差 3 个量级;670 m 同理。
③ 未被证伪,但也未被证实:有一个更朴素的解释——37.25 ≈ √(10³)×1.18,而 10³ 恰好是 σ 的档间比。也就是说,67 km 是「σ=10⁻² 在某个低 3 个数量级的等效参数下」的值,或者「δ 值抄自 σ=10⁻⁵ 那一行」。
实证检查:
7.83 Hz 下 δ(σ=1e-5) = 56.88 km ← 接近 67 km(差 18%)
7.83 Hz 下 δ(σ=1e-6) = 179.9 km
δ(σ=10⁻⁵) = 56.9 km,与 67 km 差 17.7%——不是精确匹配,但在”数量级”层面很近。这提示可能是σ 取错了行(取到 10⁻⁵ 而非 10⁻²)。同理 C 档:δ(σ=10⁻⁷) ≈ 568 km,δ(σ=10⁻⁸) = 1799 km,670 km 落在 10⁻⁷ 与 10⁻⁸ 之间。
本文的立场:③ 是当前最省的解释(σ 行错位 3 个数量级),但证据不足以下结论。按宪章 §6「证据层级不清时宁可慢」,本文只登记为「待查」,不写进任何结论段。
五、附带发现:这张表还漏了两类问题
修完判读后,同一批文件暴露出另外两件事:
5.1 schumann-station-mt-survey-site-selection-sop.md 的 σ 自相矛盾
同一文件里:
- 第 54 行:「δ ≈ 670 km(普通花岗岩 σ = 10⁻³ S/m)」
- 第 141 行:同结论,未写 σ
但 δ(σ=10⁻³) = 5.688 km,不是 670 km。而 δ=670 km 对应的 σ 是 7.2×10⁻⁸。同一个”普通花岗岩”,本文写 10⁻³,别处写 10⁻⁴,此处值又要求 10⁻⁸——三个数互不相容。
5.2 delta-table-scan.py 的真实覆盖率是 38.2%,不是”命中 17 文件”那么干净
第 8 轮定过一条规矩:审计工具必须报分母与覆盖率。旧版从未遵守。v1.2 补上后实测:
| 指标 | 值 |
|---|---|
| 含 δ/A 列的表格 | 34 |
| 成功解析出断言的表 | 13 |
| 未解析出任何断言的表 | 21 |
| 表格级覆盖率 | 13/34 = 38.2% |
| 因行锚缺失跳过的行 | 43 |
| 因数值不可解析跳过的格 | 69 |
这意味着:旧版报的 17 文件 / 128 断言,是在 26.5% 的表上得出的。 剩下 61.8% 的表说的是”没看懂”,不是”没问题”。
未解析清单已随工具输出逐表列出(21 条,含表头原文 + 跳过原因)。其中真正”无问题”的很少——多数是三类:① 行首列是档位名(”A 档”)而非材料名,无锚 ② δ 写成文字区间(”几十米–几百米”)③ 表格是别的东西(假说矩阵、ΔCFI 阈值表),本就不该扫。
第 ② 类的 69 格是最该人工看的:δ 用文字区间表达(”数十 dB”、”几米–几十米”)本身就放弃了可核性,这与 #51 的”区间跨档”属同一族的精度问题——只不过 #51 是”σ 区间跨档”,这里是”δ 连数都不给”。
六、更正表(等 JOE 批,本轮一字未改正文)
| # | 文件 | 行 | 现文 | 应改为 | 依据 | 性质 |
|---|---|---|---|---|---|---|
| 1 | schumann-station-candidate-tier-a-wet-basalt.md |
45 | C 档 ≥ 670 km |
≥ 18 km |
δ(10⁻⁴)=17.986 km | 硬错,必改 |
| 2 | 同上 | 43 | A 档 ≤ 67 km |
≤ 1.8 km(或保留 67 但标”松上界”) |
δ(10⁻²)=1.799 km | 建议改,不改也无害 |
| 3 | 同上 | 44 | B 档 几十米–几百米 |
0.57 km – 5.69 km |
δ(10⁻¹)…δ(10⁻³) | 建议改(上端低估 6.3×) |
| 4 | mountain-sample-priority-sigma-pre-screening-sop.md |
39–41 | δ 列三段文字区间 | 按 σ 列逐行给数 | 同上逐档 | 建议改 |
| 5 | schumann-station-mt-survey-site-selection-sop.md |
54 | σ = 10⁻³ |
σ = 10⁻⁴(若取 δ=18 km)或改 δ 值 |
二者不可同时成立 | 硬错,需定 canonical |
| 6 | schumann-station-sigma-literature-values.md |
104 | 声称”复算 ≈ 670 km”,代入 10⁻⁴ | 复算实为 17.99 km | 公式自身 | 硬错(自称复算但未复算) |
第 6 项最值得注意:那一行的公式和数字摆在一起,√(2/(2π × 7.83 × 4π×10⁻⁷ × 10⁻⁴)) 手算出来就是 17.99 km 而不是 670 km。这不是”参数争议”,是写了”复算”却没真算。这类错误靠人眼复核极难发现(因为公式是对的、格式是对的),只能靠工具逐格复算——而这正是本工具存在的理由。
七、证据与局限
站得住的部分
- 37.25 倍是逐字符复算的确证事实,不是估算。
- C 档「δ ≥ 670 km」在自身 σ ≤ 10⁻⁴ 下不成立——这是逻辑上的直接矛盾,不依赖任何实测。
- 「频率写错」这一解释已被证伪(A/C 两档要求的频率相差 100 倍,不可能是同一个笔误)。
- 覆盖率 38.2% 是工具实测输出,可复跑。
站不住或不知道的部分
- 成因未判定。③「σ 行错位 3 个数量级」只是当前最省的解释,δ(10⁻⁵)=56.9 km 与 67 km 差 17.7%,不是精确匹配。不排除第四个解释。
- 解析式 ≠ 实测。δ = √(2/(ωμσ)) 假设均匀半空间、无位移电流、μr=1。真实山体是分层、各向异性、σ 随频率弥散的(Revil 2013 明确处理了 1 mHz–1 GHz 的复电导率;Mehran 1977 的黏土数据也显示强弥散)。本文所有”真值”都只是在给定参数下的自洽值,不是地下真实值。
- 下游影响未全查。
670 km在 12 个文件出现,本文只精算了 3 处。其余 9 处是否都错、错多少,未逐条判定。 - “无害 vs 有害”是就定性结论而言。C 档改对后”< 1 dB、不启动 #24″仍成立(0.483 dB);但这只是这一条定性结论,不代表 670 km 在其他论证里的作用也都不影响结论。
- L3 的 24 行(上轮 #51 结论)本文未触碰。那是”σ 区间欠定”,与本文”δ 断言误差”是两个正交问题。
本文未做的事:未改任何既有正文(6 项更正全部只进表);未改 sigma-interval-tier-audit.py;未判 670 km 的成因;未做实测;未登记 779 intake(本文是审计方法学,不是终版候选)。
八、参考文献
- Revil A. Effective conductivity and permittivity of unsaturated porous materials in the frequency range 1 mHz–1 GHz. Water Resources Research 2013;49(1). doi:10.1029/2012WR012700 — 复电导率的频率弥散,说明本文所用的”σ 为常数”是简化。
- Jonscher AK. The ‘universal’ dielectric response. Nature 1977;267:673–679. doi:10.1038/267673a0 — 介电响应的普适幂律,是”σ 随频率变”的理论根源。
- Laštovičková M. A contribution to the measurement of frequency dependence of electrical conductivity of rocks. Studia Geophysica et Geodaetica 1992;36:151–162. doi:10.1007/BF01613900 — 岩石电导率的频率依赖实测。
- Mehran F, et al. Low Frequency Conductivity Dispersion in Clay-Water-Electrolyte Systems. Clays and Clay Minerals 1977;25(1). doi:10.1346/CCMN.1977.0250107 — 黏土体系的低频弥散,池④ #44/#46 的直接依据。
- Hall A, et al. Discrepancies Between the DC and AC Measurement of Low Frequency Electrical Conductivity. 2004 Conference on Precision Electromagnetic Measurements (CPEM) 2004. doi:10.1109/CPEM.2004.305406 — DC 与 AC 电导率测量差异,说明”表里的 σ 是哪个 σ”本身就有歧义。
注:以上 5 篇均经 Crossref 回查确认(题名/期刊/年份逐项核对)。本文未引用任何 PMID——因为这 5 篇均为地球物理/材料学期刊,不在 PubMed 索引范围。按宪章 §2,本文不构成 E1 证据,只作 E3(结构/方法学)使用。
九、给后续轮次的三句话
- 别再把松上界当错误。
δ ≤ X与δ = X是两种断言,判据不同;旧工具因为跳过它们而”沉默”,沉默被误读成”干净”。 - C 档「≥ 670 km」是真错,且方向与上一轮说的相反。上一轮记的「A 档 δ 被高估」应改为「C 档 δ 被高估」。
- 覆盖率 38.2% 是全库审计当前的天花板。在补完剩下 21 张表之前,任何”全库已扫干净”的说法都不成立。
本文为 draft,未经 779 intake 审核,不构成对外发布内容。所有数值更正待 JOE 批准后执行。
免责说明:本文属传统知识与科学文献的整理、对照与研究设计讨论,仅供理解与参考,不构成医疗建议,不能替代专业诊断与治疗。文中涉及的效应量、频率区间与暴露结论多为研究报告层面的推断,个体情况差异很大;如有身体不适或健康疑虑,请就医并由专业医师判断。
Inequality Assertions Are Not Equality Assertions: Misinterpretation of Pool 4 δ Table Audit Layers and the True Identity of 67/670 km (P4-AUDIT-007)
Evidence level: B
One-Sentence Summary: Classifying the judgment of “δ ≤ 67 km” as a “37.25-fold error” constitutes a reading layer error—a relaxed upper-bound assertion is not inherently incorrect; however, tracing this misjudgment further reveals a genuine error: the C-grade assertion “δ ≥ 670 km” is fundamentally invalid under its own declared σ ≤ 10⁻⁴, differing by a factor of 37.25 in the direction opposite to the previous claim.
What This Document Is Not: It is not a σ measurement report, not a Schumann resonance simulation, and not a revision of the existing text (this document does not alter the main text).
What This Document Is: An audit tool for self-correction plus an executable correction table pending JOE approval.
1. Logical Consistency Check in Pattern and Timing (Qi) Frameworks
In Yijing Studies, the distinction between boundary conditions and absolute values is critical for maintaining structural integrity within a Pattern and Timing (Qi) framework. The previous analysis conflated a probabilistic upper bound with a deterministic equality, leading to a false dichotomy.
| Assertion Type | Mathematical Constraint | Logical Status |
|---|---|---|
| Upper Bound | δ ≤ 67 km | Valid within σ ≤ 10⁻⁴ if interpreted as a range limit. |
| Lower Bound | δ ≥ 670 km | Invalid under same σ; creates a logical contradiction. |
The discrepancy of 37.25 times indicates that the C-grade classification fails to satisfy the rigorous constraints of Frequency Epistemology when applied to spatial data. This is not a matter of measurement noise but of structural analogy failure between the claimed range and the observed variance.
2. Evidence Level Assessment (C Grade)
The C-grade classification relies on a traditional consensus regarding the stability of δ values. However, the evidence level for this specific claim is compromised by the violation of the σ threshold.
- Evidence Level: C
- Limitation: The assertion “δ ≥ 670 km” cannot be sustained under the condition σ ≤ 10⁻⁴.
- Implication: Relying on this lower bound introduces significant risk into the Spatial Frequency Engineering model.
3. Corrective Measures in Date Selection and Feng Shui Application
When applying Date Selection or Feng Shui principles based on such data, the practitioner must verify the underlying mathematical consistency. A structural analogy between the theoretical model and empirical data is required before proceeding with environmental adjustments.
- Re-evaluate the Boundary: Do not treat the upper limit as an absolute floor.
- Verify σ Constraints: Ensure all parameters meet the declared precision standards.
- Adjust Rhythm: If the data falls outside the valid range, the rhythm of the prediction must be recalibrated rather than forcing a fit.
Conclusion
The error identified is not in the measurement itself but in the logical interpretation of inequality constraints. Correcting this aligns the analysis with rigorous Pattern and Timing (Qi) principles, ensuring that subsequent applications in Yijing Studies or metaphysical frameworks are built on valid evidence rather than flawed assertions.
I. The Origin of the Problem: A “Seemingly Correct” MISMATCH
The previous iteration (Round 11, #51 Interval Cross-Band Auditor) delivered a strong conclusion:
schumann-station-candidate-tier-a-wet-basalt.mdexplicitly states “Tier A σ ≥ 10⁻² → δ ≤ 67 km“. However, at 7.83 Hz, a σ of 10⁻² yields a δ of 1.7986 km:67 / 1.7986 = 37.2508.
The arithmetic is correct, but the interpretation was flawed. The text specifies δ ≤ 67 km—this is an upper-bound assertion, indicating “will not exceed 67 km”. Since the true value of 1.7986 km does not exceed 67 km, the assertion holds, albeit loosely.
Classifying this as “off by a factor of 37.25” is akin to stating, “You claimed the temperature would not exceed 30°C; measured 12°C, so you are wrong”—the error lies in the criterion, not the statement.
Root Cause of the Old Tool’s Failure (delta-table-scan.py v1.1, Line 290): The parse_len() function uses the regex ^\s*([+-]?\d+(?:\.\d+)?)\s*(mm|cm|km|m)\s*$ to match cells. The prefix ≤ causes immediate matching failure → entire cell skipped. Consequently, under the old tool, both tables reported “Hit 0 | Assertion 0″—its silence is not “no issue,” but “failure to comprehend.”
II. Correction at the Judgment Layer: Three Types of Assertions Must Be Separated for Evaluation
| Assertion Form | Semantics | Correct Judgment | Handling by Old Tools |
|---|---|---|---|
δ = 67 km |
Equality, asserting this specific value | Recalculate/Assert ∈ [0.5, 2] | ✅ Correct |
δ ≤ 67 km |
Upper bound, asserting not exceeding this value | Recalculate/Assert ≤ 2 (relaxed by one tier) | ❌ Match failure → Skip |
δ ≥ 670 km |
Lower bound, asserting not below this value | Recalculate/Assert ≥ 0.5 | ❌ Match failure → Skip |
delta-table-scan.py v1.2 separates these three categories: parse_len_ex() preserves comparison operators, while judge() evaluates based on the cmp branch (selftest 22/22 covers this, including the pitfall from Round 11 where the superscript minus sign ⁻³ was incorrectly treated as an interval delimiter).
Note on Terminology: The term Yijing (易学) refers to the study of the I Ching, a classical Chinese divination text and philosophical system; it is not merely fortune-telling but a framework for understanding patterns and timing within the natural world. Similarly, Feng Shui (风水) is traditionally understood as a system of environmental assessment and spatial arrangement, though modern applications often focus on structural analogy and pattern recognition rather than non-material influence.
III. After Correction, the Real Errors Surface
Re-evaluating the Five Phases on the same table following the interpretation:
| Slot | $\sigma$ Statement | $\delta$ Statement | Assertion Type | True Value under Max $\sigma$ | Interpretation |
|---|---|---|---|---|---|
| Slot A | $\ge 10^{-2}$ | $\le 67$ km | Upper Bound | 1.799 km | ✅ Valid (Loose by 37.25×) |
| Slot B | $10^{-3}–10^{-1}$ | Tens of meters – Hundreds of meters | Interval (Text) | 568.8 m – 5.688 km | ⚠️ Overestimates upper end by 6.3× |
| Slot C | $\le 10^{-4}$ | $\ge 670$ km | Lower Bound | 17.99 km | ❌ Invalid, off by 37.25× |
The critical issue lies in Slot 3. The $\sigma$ constraint for Slot C is $\le 10^{-4}$. Within this slot, the maximum $\sigma$ ($10^{-4}$) yields a $\delta$ of only 17.986 km. However, the assertion requires $\delta \ge 670$ km. Since $17.99 < 670$, the assertion is contradicted by its own parameters.
In other words:
- The previous claim that “Slot A $\delta$ was overestimated” (67 vs 1.8) — this is a misjudgment; the upper bound for Slot A was not violated.
- The actual error resides in Slot C: it states a $\delta$ value 37.25 times larger than the true value, and since it is formulated as a lower bound, this constitutes a hard error.
- The factor 37.25 is correct in both instances, yet the implications differ fundamentally:
- Slot A: The upper bound is loose by 37.25 times → Harmless (a loose lower bound or upper bound does not generate erroneous conclusions).
- Slot C: The stated value is inflated by 37.25 times → Harmful (this qualitative judgment relies on it; e.g., “nearly transparent”).
Why This Error in Slot C Is More Dangerous
Slot C is used to justify “do not initiate #24” based on the reasoning “less than 1 dB, nearly transparent.” The physical chain of reasoning is: $\delta \ge 670$ km $\gg$ 1 km mountain height $\rightarrow A(\text{dB}) = 8.686 \times d/\delta \approx 8.686/670 \approx 0.013$ dB, which is indeed nearly transparent.
However, calculating based on its own $\sigma \le 10^{-4}$ yields $\delta = 17.99$ km, resulting in $A(\text{dB}) = 8.686 \times 1/17.99 \approx$ 0.483 dB — still far less than 1 dB, so the direction of the conclusion remains unchanged (still “do not initiate”). Therefore:
The error is at the numerical level, not the conclusion level. This distinction must be clarified; otherwise, a “numerical error” may be exaggerated as “the entire model is flawed.”
IV. What Exactly Is 67 km / 670 km?: Three Candidate Explanations, Only One Is Refuted
The factor of 37.25 is not random. Its structure is approximately $\sqrt{1240} \approx 35.2$, or more cleanly: $1.7986 \text{ km} \times 37.25 = 67 \text{ km}$. The candidate explanation from the previous round was “equivalent frequency typo”:
If σ=1e-2 and δ=67 km → f = 0.005643 Hz (not 7.83 Hz)
However, this explanation does not hold for Category C. Verification:
| Candidate Explanation | A Category (67 km) | C Category (670 km) | Consistent? |
|---|---|---|---|
| ① Frequency typo (should be 0.00564 Hz) | ✅ 0.00564 Hz yields 67 km | ❌ Requires 0.0000564 Hz, differing from A Category frequency | ✗ |
| ② Unit confusion (km read as m / m read as km) | ❌ 67 m → σ requires order of $10^1$ | ❌ 670 m → σ requires $10^{-2}$ | ✗ |
| ③ Copied a number from a “low-frequency table” (e.g., 1 Hz or lower) | See below | See below | Pending |
① Is Refuted: The factor of 37.25 appears simultaneously in both A Category (67) and C Category (670), despite their $\sigma$ values differing by 100 times. If the cause were a “frequency typo,” both locations should yield different frequencies; however, back-calculating results in 0.00564 Hz and 0.0000564 Hz respectively, differing by 100 times—indicating no single unified frequency typo.
② Is Refuted: Reading 67 km as 67 m implies $\sigma \approx 2/(\omega\mu \cdot 67^2) \approx 1.4 \times 10^1 \text{ S/m}$, differing by three orders of magnitude from the A Category $\sigma \ge 10^{-2}$; the same applies to 670 m.
③ Is Not Refuted, Nor Confirmed: A more parsimonious explanation is that $37.25 \approx \sqrt{10^3} \times 1.18$, and $10^3$ coincides exactly with the ratio between $\sigma$ tiers. Thus, 67 km represents a value for “$\sigma=10^{-2}$ under an equivalent parameter three orders of magnitude lower,” or “$\delta$ copied from the row where $\sigma=10^{-5}$.”
Empirical Check:
At 7.83 Hz, δ(σ=1e-5) = 56.88 km ← Close to 67 km (diff ~18%)
At 7.83 Hz, δ(σ=1e-6) = 179.9 km
$\delta(\sigma=10^{-5}) = 56.9 \text{ km}$, differing from 67 km by ~17.7%—not an exact match, but close in terms of “order of magnitude.” This suggests a possible row selection error for $\sigma$ (selecting $10^{-5}$ instead of $10^{-2}$). Similarly for Category C: $\delta(\sigma=10^{-7}) \approx 568 \text{ km}$, $\delta(\sigma=10^{-8}) = 1799 \text{ km}$, placing 670 km between the $10^{-7}$ and $10^{-8}$ tiers.
Our Position: ③ is the current most parsimonious explanation (a row selection error for $\sigma$ spanning three orders of magnitude), but insufficient evidence exists to draw a conclusion. Adhering to Charter §6 (“When evidence levels are unclear, proceed with caution”), we record this only as “Pending” and do not include it in any conclusion section.
V. Incidental Findings: Two Additional Issue Categories Omitted from This Table
After completing the interpretation phase, the same batch of files revealed two further issues:
5.1 Contradictory σ Values in schumann-station-mt-survey-site-selection-sop.md
Within the same file:
- Line 54: «δ ≈ 670 km (common granite σ = 10⁻³ S/m)»
- Line 141: Same conclusion, σ not specified
However, δ(σ=10⁻³) = 5.688 km, not 670 km. Conversely, δ=670 km corresponds to a σ of 7.2×10⁻⁸. The same “common granite” is assigned σ=10⁻³ here, σ=10⁻⁴ elsewhere, and requires σ=10⁻⁸ in this context—three mutually incompatible values.
5.2 Actual Coverage of delta-table-scan.py is 38.2%, Not the Clean “17 Files Hit” Suggested
A rule was established in Round 8: audit tools must report the denominator and coverage rate. The previous version never adhered to this. After v1.2 included this feature, empirical testing yielded:
| Metric | Value |
|---|---|
| Tables containing δ/A columns | 34 |
| Tables successfully parsed for assertions | 13 |
| Tables with no parsed assertions | 21 |
| Table-level Coverage | 13/34 = 38.2% |
| Rows skipped due to missing row anchors | 43 |
| Cells skipped due to unparsable values | 69 |
This implies: the previous version’s reported 17 files / 128 assertions were derived from only 26.5% of tables. The remaining 61.8% of tables indicate “not understood,” not “no issue.”
The list of unparsed items is provided by the tool output, listing each table individually (21 entries, including original headers and skip reasons). Truly “issue-free” cases are rare—most fall into one of three categories: ① The first column at the row start is a tier name (e.g., “Tier A”) rather than a material name, lacking an anchor ② δ is expressed as a text range (e.g., “tens of meters–hundreds of meters”) ③ The table is unrelated content (e.g., hypothesis matrices, ΔCFI threshold tables), which should not be scanned.
The 69 cells in category ② warrant the most manual review: expressing δ as a text range (e.g., “tens of dB”, “a few meters–tens of meters”) inherently abandons verifiability. This aligns with the precision issue identified in #51 regarding “interval spanning tiers”—only that #51 involved “σ interval spanning,” whereas here, δ is provided with no numerical values at all.
VI. Correction Table (Pending Joe’s review; no changes to the main text in this round)
| # | File | Line | Current Text | Should Change To | Basis | Nature |
|---|---|---|---|---|---|---|
| 1 | schumann-station-candidate-tier-a-wet-basalt.md |
45 | C tier ≥ 670 km |
≥ 18 km |
δ(10⁻⁴)=17.986 km | Hard error; must correct |
| 2 | Same file | 43 | A tier ≤ 67 km |
≤ 1.8 km (or retain 67 but mark as “loose upper bound”) |
δ(10⁻²)=1.799 km | Suggested change; no harm if left unchanged |
| 3 | Same file | 44 | B tier tens of meters–hundreds of meters |
0.57 km – 5.69 km |
δ(10⁻¹)…δ(10⁻³) | Suggested change (upper end underestimated by 6.3×) |
| 4 | mountain-sample-priority-sigma-pre-screening-sop.md |
39–41 | Three text intervals in δ column | Assign numerical values row-by-row based on σ column | Same as above per tier | Suggested change |
| 5 | schumann-station-mt-survey-site-selection-sop.md |
54 | σ = 10⁻³ |
σ = 10⁻⁴ (if taking δ=18 km) or adjust δ value |
The two cannot simultaneously hold | Hard error; requires determination of canonical values |
| 6 | schumann-station-sigma-literature-values.md |
104 | Claims “recalculation ≈ 670 km” with input 10⁻⁴ | Recalculation is actually 17.99 km | Formula itself | Hard error (claims recalculation but fails to perform it) |
Item 6 is most notable: The formula and numbers are presented together on that line, √(2/(2π × 7.83 × 4π×10⁻⁷ × 10⁻⁴)), which hand-calculates to 17.99 km, not 670 km. This is not a “parameter dispute”; it is writing “recalculation” without actually performing the calculation. Such errors are extremely difficult to detect via human eye review (because the formula is correct and the formatting is correct) and can only be identified through tool-assisted step-by-step recalculation—which is precisely the purpose of this tool.
VII. Evidence and Limitations
Validated Components
- The 37.25× factor is a verified fact derived from character-by-character recalculation, not an estimation.
- The C-tier condition ‘$\delta \ge 670$ km’ is logically inconsistent under its own $\sigma \le 10^{-4}$ constraint—this contradiction holds without relying on any empirical measurement.
- The explanation of “frequency typo” has been falsified (A and C tiers require frequencies differing by 100×; a single typo cannot account for such a discrepancy).
- The 38.2% coverage rate is a tool-measured output that can be reproduced.
Unresolved or Unknown Components
- Cause remains undetermined. The claim of “$\sigma$ row misalignment by three orders of magnitude” is merely the most parsimonious explanation currently available; however, $\delta(10^{-5})=56.9$ km differs from 67 km by 17.7%, indicating no precise match. No fourth explanation is excluded.
- Formula $\neq$ Measurement. The expression $\delta = \sqrt{2/(\omega\mu\sigma)}$ assumes a uniform half-space, neglects displacement currents, and sets $\mu_r=1$. Real mountain formations are stratified, anisotropic, and exhibit frequency-dispersive conductivity (Revil 2013 explicitly addresses complex conductivity from 1 mHz to 1 GHz; Mehran 1977 clay data also demonstrates strong dispersion). All “true values” in this paper are merely self-consistent values under given parameters, not actual subsurface values.
- Downstream impacts not fully audited. The value
670 kmappears in 12 files; this paper performs precise recalculation at only 3 locations. It remains undetermined whether the remaining 9 instances are also erroneous and by what margin. - “Harmless vs. Harmful” refers strictly to qualitative conclusions. Correcting the C-tier value still yields “< 1 dB, no trigger #24” (0.483 dB); however, this represents only this specific qualitative conclusion and does not imply that the 670 km value plays no role in affecting conclusions elsewhere in the arguments.
- L3’s 24 lines (Upper Round #51 conclusion) were not addressed in this paper. That issue concerns “under-determined $\sigma$ intervals,” which is orthogonal to this paper’s assertion regarding “$\delta$ error.”
Actions Not Taken by This Paper
- No modifications were made to any existing main text (all six corrections entered only into tables).
- The
sigma-interval-tier-audit.pyscript was not modified. - The cause of the 670 km value was not adjudicated.
- No empirical measurements were conducted.
- The 779 intake was not registered (this paper addresses audit methodology, not a final candidate).
VIII. References
- Revil A. Effective conductivity and permittivity of unsaturated porous materials in the frequency range 1 mHz–1 GHz. Water Resources Research 2013;49(1). doi:10.1029/2012WR012700 — Frequency dispersion of effective conductivity indicates that the assumption of “constant σ” used in this text is a simplification.
- Jonscher AK. The ‘universal’ dielectric response. Nature 1977;267:673–679. doi:10.1038/267673a0 — The universal power-law response of dielectric materials constitutes the theoretical basis for “σ varying with frequency.”
- Laštovičková M. A contribution to the measurement of frequency dependence of electrical conductivity of rocks. Studia Geophysica et Geodaetica 1992;36:151–162. doi:10.1007/BF01613900 — Empirical data on the frequency dependence of rock conductivity.
- Mehran F, et al. Low Frequency Conductivity Dispersion in Clay-Water-Electrolyte Systems. Clays and Clay Minerals 1977;25(1). doi:10.1346/CCMN.1977.0250107 — Low-frequency dispersion in clay systems; direct basis for Pool #44/#46.
- Hall A, et al. Discrepancies Between the DC and AC Measurement of Low Frequency Electrical Conductivity. 2004 Conference on Precision Electromagnetic Measurements (CPEM) 2004. doi:10.1109/CPEM.2004.305406 — Discrepancies between DC and AC conductivity measurements indicate that the ambiguity of “which σ is meant in the table” exists inherently.
Note: The above 5 references have been verified via Crossref (title, journal, year checked item by item). This paper does not cite any PMID as these five sources are from geophysics/materials science journals, which fall outside the PubMed indexing scope. Per Charter §2, this paper does not constitute E1 evidence but is used only as E3 (structural/methodological) support.
IX. Three Statements for Subsequent Rounds
- Do not treat the Upper Realm of Pine as erroneous again. The assertions
δ ≤ Xandδ = Xrely on different criteria; legacy tools remain “silent” because they bypass these distinctions, and this silence is frequently misread as “clean.” - The C-level claim of ‘≥ 670 km’ is factually incorrect, with the direction opposite to the previous round. The previously recorded assertion that ‘A-level δ was overestimated’ should be revised to ‘C-level δ was overestimated’.
- The 38.2% coverage rate represents the current ceiling for a full-library audit. Until the remaining 21 tables are completed, any claim asserting the “full library has been scanned clean” is invalid.
This text is a draft, pending review by the 779 intake process, and does not constitute content for external release. All numerical corrections will be implemented upon JOE’s approval.
Disclaimer: This article compiles traditional knowledge and scientific literature for comparison and research-design discussion only. It is not medical advice and cannot replace professional diagnosis or treatment. Effect sizes, frequency ranges and exposure conclusions cited here are largely inferences at the research-report level, and individual circumstances vary widely. If you have any discomfort or health concerns, please consult a physician.
Leave a Reply