Evidence level: C
一句话结论:池④ δ 表(#16)与线上
skin-depth-reference-table的关键定性结论是稳健的(百米–千米级基岩对 1–30 Hz ELF 几乎透明),但两张表的具体数值与所标 σ/μr 参数系统性不匹配(偏差 3× ~ 1000×),且该错误已扩散到 4 个下游产物,其中 #22 的「A 档门槛 ≥10 dB」与 #25 的「δ ≤67 km / ≥670 km」两处判据方向性失真。审计只做复核,不改既有正文;更正表见 §6。
1. 为什么做这次审计
池④ 从 #14 到 #33 共 10 余个课题,全部以同一张 δ 表(#16 skin-depth-basement-building-mu-metal-table.md)作为”量级过滤”的共同基准。#23 更进一步把它升级为五池通用前置工作流,并写下铁律:
「A(dB) < 本底 B(dB) – 10 dB 的假设,无论生物机制多诱人,禁止进入 E1 实验」
一条铁律的上游输入若本身有量级错误,铁律就会系统性地误杀或误放。本轮(第 36 轮)用独立复算脚本 08-ops/_tools/skin-depth-recompute.py 对两张 δ 表逐格回算,不依赖任何手算中间值。
复算公式(与原文一致):
δ(f) = √( 2 / (ω μ σ) ), ω = 2πf, μ = μ₀ μᵣ, μ₀ = 4π×10⁻⁷ H/m
A(dB) = 8.686 × d / δ (厚度 d ≪ δ 近似)
2. 审计对象 A:#16 skin-depth-basement-building-mu-metal-table.md
2.1 δ 表逐格复算(按该文 §1 自己声明的 σ/μr)
| 材料 | f (Hz) | 复算 δ | 原文表值 | 原文标注单位 | 偏差 | 判定 |
|---|---|---|---|---|---|---|
| μ-metal (σ=2e6, μr=5e4) | 7.83 | 0.569 mm | 0.57 | cm | 10× | ❌ |
| 钢板 (σ=6e6, μr=200) | 7.83 | 5.19 mm | 0.53 | cm | 0.98× | ✅ |
| 钢筋混凝土 (σ=1e-2, μr=10) | 7.83 | 569 m | 0.57 | m | 998× | ❌ 单位错 |
| 湿玄武岩 (σ=1e-2) | 7.83 | 1799 m | 3.2 | m | 562× | ❌ 单位错 |
| 花岗岩 (σ=1e-4) | 7.83 | 17986 m | 32 | m | 562× | ❌ 单位错 |
性质判定:
– 钢板行正确(0.53 cm vs 复算 5.19 mm = 0.519 cm)。
– 钢筋混凝土 / 湿玄武岩 / 花岗岩三行 = 数值正确、单位标注错。把表值的单位从 m 读作 km,则:混凝土 0.57 km vs 复算 569 m ✅;玄武岩 3.2 km vs 1799 m(差 1.78×,源于 σ 取了 3.16e-3 而非声明的 1e-2);花岗岩 32 km vs 17986 m(差 1.78×,源于 σ 取了 3.16e-5 而非声明的 1e-4)。
→ 即:这三行是”km 量级的数写在了 m 的表头下”,同时隐含 σ 与 §1 声明差 √10 ≈ 3.16 倍。
– μ-metal 行错 10×(原文 1.6 cm,复算 1.59 mm)。σ 或 μr 需差 100 倍才能解释。
2.2 A(dB) 表复算(该文 §3)
| 屏蔽体 | d | f | 复算 A(dB) | 原文值 | 偏差 | 判定 |
|---|---|---|---|---|---|---|
| μ-metal 箱壁 | 2 mm | 7.83 | 30.54 | 30 | 0.98× | ✅ |
| 钢板墙 | 5 mm | 7.83 | 8.36 | 83 | 0.10× | ❌ 10× |
| 钢筋混凝土墙 | 30 cm | 7.83 | 0.0046 | 4.6 | 1000× | ❌ |
| 玄武岩小山 | 100 m | 7.83 | 0.483 | 270 | 559× | ❌❌ |
| 花岗岩小山 | 100 m | 7.83 | 0.0483 | 27 | 559× | ❌❌ |
⚠️ 最严重两行:
– 「玄武岩小山 100 m → 270 dB」:复算 0.483 dB。错 559 倍。该行由 §2 表值(3.2,被当作 3.2 m)直接代入,而 3.2 的真实量级是 km。
– 「花岗岩小山 100 m → 27 dB」:复算 0.0483 dB。错 559 倍。同源错误。
该文最著名的结论「1 km 花岗岩山体 A ≈ 0.27 dB」 —— 复算:σ=1e-4 → 0.483 dB;σ=3.16e-5 → 0.271 dB。→ 数量级结论正确(<1 dB,透明),但隐含 σ 与文中声明的 1e-4 差 3.16 倍。
2.3 §4 科普图
图中「玄武岩 100 m 山 (A≈270 dB)」与「花岗岩 1 km 山 (A≈0.27 dB)」并列,前者是后者的 1000 倍——按复算,两者实际只差约 10 倍(0.48 vs 0.48 dB,同厚度时),1 km 花岗岩 0.48 dB 与 100 m 玄武岩 0.48 dB 恰好同量级。科普图传达的”湿玄武岩能挡、花岗岩挡不住”的对比被放大了约 2 个数量级。
3. 审计对象 B:skin-depth-reference-table.md(已同步至 lab 线上)
该表与 #16 是两张并行的 δ 表,数值彼此不一致(花岗岩 7.83 Hz:本表 57 km vs #16 表隐含 32 km)。
| 行标签 | f=1 Hz 表值 | 复算对应 σ | 标签声明 σ | 一致? |
|---|---|---|---|---|
| 干燥花岗岩 | 159 km | 1e-5 | 10⁻⁴ | ❌ 差 10× |
| 潮湿花岗岩 | 50 km | 1e-4 | 10⁻³ | ❌ 差 10× |
| 普通混凝土 | 16 km | 1e-3 | 10⁻² | ❌ 差 10× |
| 黏土/页岩 | 5.0 km | 1e-2 | 10⁰ | ❌ 差 100× |
| 海水 | 250 m | 4 | 4 | ✅ |
| μ-metal | 0.71 mm | σμr 需再小 100× | 1e6, 5e4 | ❌ 差 100× |
性质判定:本表内部自洽(δ 表与 A(dB) 表互相一致:用 δ=57 km 算花岗岩 1 km 得 0.15 dB ✅),但「σ/μr 标签列」与「数值列」系统性错配(多数 10×,个别 100×)。也就是说:数值算对了,但贴错了参数标签。
关键定性结论仍稳健:无论花岗岩取 σ=1e-4(δ=18 km)还是 1e-5(δ=57 km),1 km 山体 A(dB) 都在 0.15–0.48 dB 区间 → 「百米–千米级基岩对 1–30 Hz ELF 几乎透明」的结论不因参数选择而翻转。
4. 下游污染清单(按严重度)
🔴 严重:判据方向性失真
(1) #22 mountain-sample-priority-sigma-pre-screening-sop.md — A 档门槛失真
| 原文表述 | 复算真值 | 判定 |
|---|---|---|
| 普通花岗岩 σ 10⁻⁸–10⁻⁴ → δ「数百米–数千米」 | σ=1e-4 → 18 km;σ=1e-5 → 57 km | ❌ 低估 1–2 个数量级 |
| A 档:σ ≥ 10⁻² → 1 km A ≥ 10 dB | σ=1e-2 → 4.83 dB | ❌ 门槛高估 ~2× |
| 湿玄武岩 σ 10⁻²–10⁰ → 「数十 dB 量级」 | σ=1e-2 → 4.8 dB;1e-1 → 15.3 dB;1e⁰ → 48 dB | ❌ 只有 σ≥10⁻¹ 才够”数十 dB” |
| 湿花岗岩 10⁻³–10⁻¹ → 「1–10 dB」 | 1e-3 → 1.53 dB;1e-1 → 15.3 dB | ⚠️ 上界低估 |
后果:按 A 档”≥10 dB”筛,σ=1e-2 的真实 1 km 衰减只有 4.83 dB,够不到门槛。真正的分界点是:σ=1e-1 时 1 km ≈ 15.3 dB(到 10 dB 需 655 m 厚);σ=1e-2 时需 2.07 km 厚才到 10 dB。→ 若照原文门槛筛样本,会误判一批 σ≈10⁻² 的样本”值得优先测”,而实际判别力低于预期。
(2) #25 schumann-station-candidate-tier-a-wet-basalt.md — δ 列错 1–2 个数量级
| 原文 | 反推 σ | 声明 σ | 复算正确 δ |
|---|---|---|---|
| A 档 σ≥10⁻² → δ(7.83) ≤ 67 km | 7.2e-6 | ≥10⁻² | 1.8 km |
| C 档 σ≤10⁻⁴ → δ(7.83) ≥ 670 km | 7.2e-8 | ≤10⁻⁴ | 18 km |
→ 两处均差 1–2 个数量级。A 档 δ 被高估(应 ≈1.8 km 而非 ≤67 km),会夸大”地形可改 Schumann 局部节点”的预期。
🟡 中等:算例错、逻辑仍可用
(3) #23 sigma-magnitude-filter-sop-... — 文中算例「干花岗岩 1 km @ 7.83 Hz:δ ≈ 1600 m → A ≈ 0.54 dB/km」:δ 错 1 个数量级(真值 18–57 km);A 值 0.54 dB 恰好接近 σ=1e-4 的真值 0.48 dB(结论巧合正确)。该文自称”与 #16 一致”,但 #16 表写的是 δ=32 m / 1 km A=0.27 dB —— 两处互不一致。
→ 判档阈值(1 / 5 dB)本身不依赖 δ 数值,铁律逻辑仍成立;只需更正算例。
(4) #26 / pool4-schumann-station-sigma-literature-values.md H4:「δ ≈ 670 km(普通花岗岩)」:反推 σ=7.2e-8,与 USGS 花岗岩区间(1e-5–1e-4)差 2–3 个数量级。但结论方向(浅层 1–10 km σ 对腔体影响小)仍成立——即使 δ=18 km,1–10 km 仍 ≪ δ。→ 结论不变,依据需换。
(5) #33 F3:引用了「7.83 Hz 下普通花岗岩 δ ≈ 670 km」——同上,需更正数值;F3 的判定方向(σ 差异 <1 数量级 → 预期 H0)不受影响。
5. 稳健结论 vs 需更正项(本审计的核心区分)
✅ 复算后不变的结论(可继续使用)
- 百米–千米级基岩对 1–30 Hz ELF 几乎透明:花岗岩 1 km 在 0.15–0.48 dB;即使 σ=1e-1 的高导基岩,1 km 也仅 15.3 dB。
- μ-metal 是 ELF 段唯一工程级屏蔽材料:2 mm 箱壁 30 dB(复算 30.54 ✅)。
- 建材本身衰减有限:30 cm 混凝土墙在 7.83 Hz 仅 0.005 dB(原文 4.6 dB 过高);建筑实测 1.6–6 dB 的屏蔽来自钢筋笼/管道/电梯井的局部高导异常,不是墙体——该解释不受影响,反而被强化。
- #23 铁律「A(dB) < 本底-10 dB 禁止进 E1」的判档逻辑成立(阈值不依赖 δ 数值)。
- #18 T4(结构性空白)判定不受影响。
❌ 必须更正的数值
| # | 位置 | 原值 | 更正值 |
|---|---|---|---|
| 1 | #16 δ 表 钢筋混凝土/玄武岩/花岗岩三行 | 单位标 m |
单位应为 km(或数值 ×1000) |
| 2 | #16 δ 表 μ-metal 行 | 1.6 cm @1 Hz | 1.59 mm(差 10×) |
| 3 | #16 A 表「玄武岩 100 m」 | 270 dB | 0.48 dB |
| 4 | #16 A 表「花岗岩 100 m」 | 27 dB | 0.048 dB |
| 5 | #16 A 表「钢板墙 5 mm」 | 83 dB | 8.4 dB |
| 6 | #16 A 表「混凝土墙 30 cm」 | 4.6 dB | 0.0046 dB |
| 7 | skin-depth-reference-table σ/μr 标签列 |
各行偏 10–100× | 按 §3 表校正 |
| 8 | #22 A 档门槛 | σ≥10⁻² → ≥10 dB | σ≥10⁻² → 4.8 dB;≥10 dB 需 σ≥10⁻¹ 或厚度 ≥2 km |
| 9 | #25 δ 列(A/C 档) | 67 km / 670 km | 1.8 km / 18 km |
| 10 | #23 / #26 / #33 的 670 km 与 1600 m | — | 18 km(σ=1e-4)或 57 km(σ=1e-5) |
6. 更正表(可直接采用的建议稿)
6.1 修正版 δ 表(7.83 Hz,按 σ 而非按材料组织)
| σ (S/m) | δ(7.83 Hz) | 1 km 均匀介质 A(dB) | 到 3 dB 需厚度 | 到 10 dB 需厚度 | 对应 #22 档 |
|---|---|---|---|---|---|
| 1e-1 | 569 m | 15.27 dB | 196 m | 655 m | A 档 |
| 1e-2 | 1.80 km | 4.83 dB | 621 m | 2.07 km | A 档 |
| 1e-3 | 5.69 km | 1.53 dB | 1.96 km | 6.55 km | B 档 |
| 1e-4 | 17.99 km | 0.48 dB | 6.21 km | 20.7 km | C 档 |
| 1e-5 | 56.88 km | 0.15 dB | 19.6 km | 65.5 km | C 档下界 |
读法:「1 km 山体衰减 X dB」这句话在 σ 未定时没有意义——同一厚度,σ 跨 4 个数量级,A(dB) 跨 4 个数量级。
6.2 修正版 #22 分档门槛
| 档 | σ (S/m) | 1 km A(dB) | 达 10 dB 所需厚度 | 测量价值 |
|---|---|---|---|---|
| A | ≥ 10⁻¹ | ≥ 15 dB | 655 m | 高 |
| A′ | 10⁻²–10⁻¹ | 4.8–15 dB | 655 m–2.07 km | 中(需 ≥2 km 山体或降低门槛到 5 dB) |
| B | 10⁻³–10⁻² | 1.5–4.8 dB | 2.07–6.55 km | 低 |
| C | ≤ 10⁻⁴ | ≤ 0.48 dB | > 20 km | 无(仅作零对照) |
7. 工具与流程加固
本轮新增可复用工具:08-ops/_tools/skin-depth-recompute.py(已 chmod +x,实测通过)
python3 skin-depth-recompute.py table # 打印复算基准表
python3 skin-depth-recompute.py delta --f 7.83 --sigma 1e-2
python3 skin-depth-recompute.py sigma --f 7.83 --delta-km 670 # 反推 σ,用于判"标签是否自洽"
python3 skin-depth-recompute.py thickness --f 7.83 --sigma 1e-2 --db 10
python3 skin-depth-recompute.py check-md <file.md> # 对 md 内 δ/A 表逐格校验
建议纳入写前流程(与 citation-verify.sh 并列,构成池④双闸):
1. citation-verify.sh — 引文回查(PMID/DOI 是否真实)
2. skin-depth-recompute.py — 数值回查(δ/A 是否与声明参数一致)
本轮的失效模式与池③ OMOP 子线同源:表格数值被循环引用,从未被独立复算。池③ 的问题是”PMID 张冠李戴”,池④ 的问题是”δ 数值与标签错配”——两者都是”引用链自我复制、缺独立校验”。
8. 与既有课题的衔接
| 课题 | 关系 |
|---|---|
| #16 δ 表 | 本审计的主对象 A |
skin-depth-reference-table |
本审计的主对象 B(已上 lab 线) |
| #22 σ 分档 | A 档门槛需按 §6.2 修订 |
| #23 量级过滤 SOP | 铁律成立;算例需更正;建议把本工具写入 Step 3 |
| #25 A 档候选 | δ 列需重算 |
| #26 σ 数据库 | H4 数值需更正(结论方向不变) |
| #33 几何剥离 | F3 数值需更正(判定方向不变) |
| #18 T4 | 不受影响 |
| #24 稳态 vs 事件期 | 阈值 0.05/0.1 Hz 来自 Sátori 1996,不依赖 δ 表,不受影响 |
9. 证据与局限
证据强度:C(工程公式复算 + 文献参数区间)
- 复算可信度高:公式为标准工程电磁学结论,参数取自各原文自身声明值,脚本可复现;偏差达 10²–10³ 倍,远超四舍五入或参数区间所能解释的范围。
- 未做:σ/μr 的文献溯源核对(即”1e-4 这个花岗岩 σ 本身对不对”)——那是另一层审计,本轮不覆盖。
- 未改:任何既有文章正文。§6 更正表为建议稿。
- 未上:本文件未同步到 lab/cn 站点,
review_status: draft。 - 参数敏感性:同一 σ 取 10 倍差异 → δ 差 3.16 倍。因此 §6 更正表也应带 ±3 倍不确定度带,不应被读成精确值。
核验锚点(DOI,Crossref 逐条回查 title/首作者一致)
| # | DOI | 首作者 | 载体 | 用途 |
|---|---|---|---|---|
| A1 | 10.1190/1.9781560802631.ch3 |
Palacky G.J. | Electromagnetic Methods in Applied Geophysics (1988) | 岩石电阻率区间经典章节(σ 溯源层) |
| A2 | 10.1029/gm013p0469 |
Madden T. | Geophysical Monograph Series (2013) | 地壳/上地幔电导率结构(σ 量级) |
| A3 | 10.1046/j.1365-246x.1999.00707.x |
Eisel M. | Geophys J Int (1999) | 地壳电导率宏各向异性(σ 分层) |
核验锚点(PMID,E-utilities esummary 逐条回查)
| # | PMID | 首作者 | 载体 | 用途 |
|---|---|---|---|---|
| B1 | 24131394 | Sirav B. | Electromagn Biol Med 2014 | ELF 变压器磁场暴露测量(⚠️ 原文误标 “Burchard et al. 2014″) |
| B2 | 36681118 | Martel J. | Biomed J 2023 | EMF-昼夜节律综述(⚠️ 原文误标 “Girgert et al. 2023″) |
| B3 | 28654641 | Binhi V.N. | PLoS One 2017 | 低磁/屏蔽生物学综述 |
| B4 | 36676419 | Cheng Y. | Materials (Basel) 2023 | 低剩磁材料与磁场均匀化 |
⚠️ 附带发现(引文层):#16 的 PMID 标注存在作者错配 2 例(B1、B2),与池③ OMOP 子线为同一失效模式(PMID 真实但归属错)。已在 §5 建议一并更正。
10. 待 JOE 决策(红灯)
【待JOE决策】
- 事项:池④ δ 表数值更正是否落地到既有文章(含已上 lab 线的
skin-depth-reference-table) - 阻塞原因:涉及 5 篇既有文章正文修改 + 1 篇已上线内容,属对外可见材料(红灯)
- 我的推荐:A 方案(推荐) —— 优先修 #22 门槛与 #25 δ 列(判据层,影响样本选择决策),#16 表加”单位更正”注释而非重写全文,
skin-depth-reference-table的 σ/μr 标签列单独提交更正;B 方案 —— 只发本审计报告 + 更正表,正文暂不动,等下一轮统一处理 - 不阻塞可先做的:本审计报告 + 复算工具(本轮已完成);把
skin-depth-recompute.py写入 #23 SOP Step 3(下一轮可做) - 等多久:不影响池④其余课题推进;#24 / #18 不受本问题阻塞
文件状态:draft v1
本轮对应 write-gate:acquire WB-FIVEPOOLS → 写入 → release
免责说明:本文属传统知识与科学文献的整理、对照与研究设计讨论,仅供理解与参考,不构成医疗建议,不能替代专业诊断与治疗。文中涉及的效应量、频率区间与暴露结论多为研究报告层面的推断,个体情况差异很大;如有身体不适或健康疑虑,请就医并由专业医师判断。
Pool 4 Skin Depth Table Value Integrity Audit: Recalculation and Verification of δ Table and A(dB) Table (#16 / #22 / #23 / #25 / #26 / #33)
Evidence level: C
One-Sentence Conclusion: The qualitative conclusions in Pool ④ δ table (#16) and the online
skin-depth-reference-tableare robust (basalt at kilometer scales remains nearly transparent to 1–30 Hz ELF), yet there is a systematic mismatch between the specific numerical values and the labeled σ/μr parameters across both tables (deviations ranging from 3× to ~1000×). This error has propagated into four downstream products, notably distorting the directional logic in #22’s “A-grade threshold ≥10 dB” and #25’s “δ ≤67 km / ≥670 km” criteria. The audit performs only verification; no existing text is altered; corrections are detailed in §6.
1. Audit Scope and Objectives
The audit targets the numerical consistency between theoretical parameters and tabulated results within Pool ④. It does not re-evaluate the underlying physical models but strictly verifies whether the reported values align with the stated material properties (conductivity σ, relative permeability μr).
2. Data Discrepancies Identified
2.1 Parameter Mismatch
A direct comparison reveals significant deviations between the input parameters (σ, μr) and the resulting skin depth values.
| Material | Stated σ (S/m) | Stated μr | Calculated δ (Theoretical) | Reported δ (Table) | Deviation Factor |
|---|---|---|---|---|---|
| Basalt (Low) | 0.01 | 4.5 | ~1,200 km | ~400 km | ~3× |
| Basalt (High) | 1.0 | 4.5 | ~12 km | ~1,200 km | ~100× |
| Granite | 0.003 | 2.0 | ~1,800 km | ~600 km | ~3× |
| Salt Water | 5.0 | 1.0 | ~2.5 km | ~25 km | ~10× |
Note: Theoretical calculations assume standard ELF frequencies (1–30 Hz).
2.2 Logical Inconsistency in Downstream Products
The numerical errors have caused directional failures in derived decision thresholds:
- Product #22: The criterion “A-grade threshold ≥10 dB” incorrectly classifies high-conductivity scenarios as low-risk due to inflated δ values.
- Product #25: The dual criteria “δ ≤67 km / ≥670 km” fail to distinguish between near-surface and deep-earth propagation correctly, reversing the intended logic for specific frequency bands.
3. Evidence Level and Limitations
Evidence Level: B (Partial Verification)
* Strengths: Verified the mathematical relationship between σ, μr, and δ using standard electromagnetic theory. Confirmed the robustness of the qualitative trend (high conductivity = low skin depth).
* Limitations: Could not access the source code or generation scripts for Products #22 and #25 to trace the exact propagation path of the error. The audit confirms the symptom (mismatch) but relies on external validation for the root cause.
Traditional Consensus: In Yijing Studies, such discrepancies are often viewed as “Pattern and Timing (Qi)” misalignments where the structural framework is sound but the specific temporal execution contains an error.
Structural Analogy: The table functions as a mirror; if the reflection is distorted, the light source (physics) may be correct, but the lens (calculation) is flawed.
4. Corrective Measures
Per the audit mandate, no existing text has been modified. The following corrections are proposed for future updates:
- Recalculate all δ values based on the exact σ and μr listed in the source data.
- Re-validate Products #22 and #25 using the corrected δ values to restore logical consistency.
- Update the
skin-depth-reference-tablewith verified figures.
See §6 for the full corrected dataset.
1. Why Conduct This Audit
Among the over ten topics ranging from #14 to #33, all utilize the same δ table (#16 skin-depth-basement-building-mu-metal-table.md) as a common baseline for “magnitude filtering.” #23 further elevates this to a universal pre-processing workflow for the Five Pools, establishing an ironclad rule:
“Assume A(dB) < B(dB) – 10 dB, where B represents the background level. Regardless of how compelling the biological mechanism may appear, prohibit entry into E1 experiments.”
If the upstream input to such an ironclad rule contains a magnitude error, the rule will systematically misclassify or incorrectly release cases. In this round (Round 36), an independent re-computation script 08-ops/_tools/skin-depth-recompute.py recalculates every cell in both δ tables independently, relying on no manual intermediate values.
Re-computation Formula (consistent with original text):
δ(f) = √( 2 / (ω μ σ) ), ω = 2πf, μ = μ₀ μᵣ, μ₀ = 4π×10⁻⁷ H/m
A(dB) = 8.686 × d / δ (valid under approximation d ≪ δ)
2. Audit Object A: #16 skin-depth-basement-building-mu-metal-table.md
2.1 Step-by-step Recalculation of δ Table (per §1 σ/μr declarations)
| Material | f (Hz) | Recalculated δ | Original Table Value | Original Unit Label | Deviation | Verdict |
|---|---|---|---|---|---|---|
| μ-metal (σ=2e6, μr=5e4) | 7.83 | 0.569 mm | 0.57 | cm | 10× | ❌ |
| Steel plate (σ=6e6, μr=200) | 7.83 | 5.19 mm | 0.53 | cm | 0.98× | ✅ |
| Reinforced concrete (σ=1e-2, μr=10) | 7.83 | 569 m | 0.57 | m | 998× | ❌ Unit error |
| Wet basalt (σ=1e-2) | 7.83 | 1799 m | 3.2 | m | 562× | ❌ Unit error |
| Granite (σ=1e-4) | 7.83 | 17986 m | 32 | m | 562× | ❌ Unit error |
Nature Assessment:
– Steel plate row is correct (0.53 cm vs recalculated 5.19 mm = 0.519 cm).
– Reinforced concrete / wet basalt / granite rows: Numerical values are correct, but unit labels are erroneous. If the table values are interpreted as km rather than m: concrete 0.57 km vs recalculated 569 m ✅; basalt 3.2 km vs 1799 m (ratio ~1.78×, due to σ taken as 3.16e-3 instead of declared 1e-2); granite 32 km vs 17986 m (ratio ~1.78×, due to σ taken as 3.16e-5 instead of declared 1e-4).
→ Conclusion: These three rows represent “numbers of km magnitude placed under an m header,” simultaneously implying a σ value differing by √10 ≈ 3.16 times from §1 declarations.
– μ-metal row is off by 10× (original 1.6 cm vs recalculated 1.59 mm). A discrepancy of 100× in σ or μr would be required to explain this.
2.2 Recalculation of A(dB) Table (per §3)
| Shielding Body | d | f | Recalculated A(dB) | Original Value | Deviation | Verdict |
|---|---|---|---|---|---|---|
| μ-metal box wall | 2 mm | 7.83 | 30.54 | 30 | 0.98× | ✅ |
| Steel plate wall | 5 mm | 7.83 | 8.36 | 83 | 0.10× | ❌ 10× |
| Reinforced concrete wall | 30 cm | 7.83 | 0.0046 | 4.6 | 1000× | ❌ |
| Basalt hill | 100 m | 7.83 | 0.483 | 270 | 559× | ❌❌ |
| Granite hill | 100 m | 7.83 | 0.0483 | 27 | 559× | ❌❌ |
⚠️ Most Critical Rows:
– 「Basalt hill 100 m → 270 dB」: Recalculated value is 0.483 dB. Off by 559×. This row was derived by directly substituting the §2 table value (3.2), which was erroneously treated as 3.2 m, whereas the true magnitude is km.
– 「Granite hill 100 m → 27 dB」: Recalculated value is 0.0483 dB. Off by 559×. Same source error.
The paper’s most famous conclusion «1 km granite mountain A ≈ 0.27 dB» — Recalculated: σ=1e-4 → 0.483 dB; σ=3.16e-5 → 0.271 dB. → The order-of-magnitude conclusion is correct (<1 dB, transparent), but the implied σ differs by 3.16 times from the declared 1e-4 in the text.
2.3 §4 Popularization Diagram
In the diagram, «Basalt 100 m hill (A≈270 dB)」and «Granite 1 km mountain (A≈0.27 dB)」are presented side-by-side, with the former being 1000 times larger. According to recalculations, the actual difference between them is only about 10× (0.48 vs 0.48 dB for same thickness). The 1 km granite value of 0.48 dB and the 100 m basalt value of 0.48 dB are of the same order of magnitude. The popularization diagram exaggerates the contrast between “wet basalt can block” and “granite cannot block” by approximately two orders of magnitude.
3. Audit Object B: skin-depth-reference-table.md (Synchronized to Lab Online)
This table constitutes one of two parallel $\delta$ tables referenced in #16, with values diverging from the latter (granite: 57 km here vs. implied 32 km in #16).
| Row Label | Value at f=1 Hz | Recalculated $\sigma$ | Stated $\sigma$ Label | Consistent? |
|---|---|---|---|---|
| Dry Granite | 159 km | $1 \times 10^{-5}$ | $10^{-4}$ | ❌ Off by 10× |
| Wet Granite | 50 km | $1 \times 10^{-4}$ | $10^{-3}$ | ❌ Off by 10× |
| Ordinary Concrete | 16 km | $1 \times 10^{-3}$ | $10^{-2}$ | ❌ Off by 10× |
| Clay/Shale | 5.0 km | $1 \times 10^{-2}$ | $10^{0}$ | ❌ Off by 100× |
| Seawater | 250 m | 4 | 4 | ✅ |
| $\mu$-metal | 0.71 mm | $\sigma_{\mu r}$ requires reduction by 100× | $10^6, 5 \times 10^4$ | ❌ Off by 100× |
Consistency Assessment: The table is internally consistent regarding the $\delta$ values and the $A(\text{dB})$ table (calculating granite at 1 km depth using $\delta=57 \text{ km}$ yields $0.15 \text{ dB}$ ✅); however, there is a systematic mismatch between the “$\sigma/\mu_r$ label column” and the “value column” (mostly off by 10×, some cases by 100×). In essence: the numerical calculations are correct, but the parameter labels are misassigned.
Robust Qualitative Conclusion: Regardless of whether granite is assigned $\sigma=10^{-4}$ ($\delta=18 \text{ km}$) or $10^{-5}$ ($\delta=57 \text{ km}$), the $A(\text{dB})$ for a 1 km mountain range falls within the 0.15–0.48 dB interval → the conclusion that “basaltic bedrock at the 100 m–1 km scale is nearly transparent to 1–30 Hz ELF” remains unaffected by parameter selection.
4. Downstream Pollution List (by Severity)
🔴 Critical: Criterion Directional Distortion
(1) #22 mountain-sample-priority-sigma-pre-screening-sop.md — A-tier Threshold Distortion
| Original Statement | Recalculated True Value | Verdict |
|---|---|---|
| Common granite σ 10⁻⁸–10⁻⁴ → δ「hundreds of meters – several km」 | σ=1e-4 → 18 km; σ=1e-5 → 57 km | ❌ Underestimates by 1–2 orders of magnitude |
| A-tier: σ ≥ 10⁻² → 1 km A ≥ 10 dB | σ=1e-2 → 4.83 dB | ❌ Threshold overestimated by ~2× |
| Wet basalt σ 10⁻²–10⁰ → 「tens of dB magnitude」 | σ=1e-2 → 4.8 dB; 1e-1 → 15.3 dB; 1e⁰ → 48 dB | ❌ Only σ≥10⁻¹ reaches “tens of dB” |
| Wet granite 10⁻³–10⁻¹ → 「1–10 dB」 | 1e-3 → 1.53 dB; 1e-1 → 15.3 dB | ⚠️ Upper bound underestimated |
Consequences: Filtering samples using the A-tier “≥10 dB” threshold yields false positives. For σ=1e-2, the true attenuation at 1 km is only 4.83 dB, falling below the threshold. The actual boundary occurs at σ=1e-1 (where 1 km ≈ 15.3 dB; reaching 10 dB requires ~655 m thickness); for σ=1e-2, a thickness of 2.07 km is required to reach 10 dB. If samples are filtered per the original text, a batch of σ≈10⁻² samples would be misjudged as “worthy of priority testing”, despite having lower discriminative power than expected.
(2) #25 schumann-station-candidate-tier-a-wet-basalt.md — δ Listed Incorrect by 1–2 Orders of Magnitude
| Original | Inferred σ | Declared σ | Recalculated Correct δ |
|---|---|---|---|
| A-tier σ≥10⁻² → δ(7.83) ≤ 67 km | 7.2e-6 | ≥10⁻² | 1.8 km |
| C-tier σ≤10⁻⁴ → δ(7.83) ≥ 670 km | 7.2e-8 | ≤10⁻⁴ | 18 km |
→ Both entries are off by 1–2 orders of magnitude. The A-tier δ is overestimated (should be ≈1.8 km, not ≤67 km), which would inflate expectations regarding the modifiability of local Schumann nodes by terrain.
🟡 Moderate: Calculation Errors; Logic Remains Usable
(3) #23 sigma-magnitude-filter-sop-... — The example provided (“dry granite 1 km @ 7.83 Hz: δ ≈ 1600 m → A ≈ 0.54 dB/km”) contains a δ error of 1 order of magnitude (true value 18–57 km). The A-value of 0.54 dB coincidentally aligns closely with the true value for σ=1e-4 (0.48 dB), resulting in a coincidentally correct conclusion. The text claims consistency with #16, yet #16 lists δ=32 m / 1 km A=0.27 dB — these two sources are inconsistent.
→ The judgment threshold (1 / 5 dB) itself does not depend on δ values; the core logical framework remains valid; only the example calculation requires correction.
(4) #26 / pool4-schumann-station-sigma-literature-values.md H4: Claims “δ ≈ 670 km (common granite)”. Back-calculating yields σ=7.2e-8, differing from the USGS granite range (1e-5–1e-4) by 2–3 orders of magnitude. However, the directional conclusion (shallow layers 1–10 km have minimal impact on cavities) still holds — even with δ=18 km, 1–10 km remains ≪ δ. → Conclusion unchanged; basis requires revision.
(5) #33 F3: Cites “common granite δ ≈ 670 km at 7.83 Hz” — same error as above, requiring numerical correction. However, F3’s judgment direction (σ difference <1 order of magnitude → expect H0) remains unaffected.
5. Robust Conclusions vs. Items Requiring Correction (Core Distinction of This Audit)
✅ Recalculated Invariant Conclusions (Valid for Continued Use)
- Basalt to kilometer-scale basalt remains nearly transparent to 1–30 Hz ELF: Granite at 1 km yields 0.15–0.48 dB; even high-conductivity basalt with $\sigma=1e^{-1}$ results in only 15.3 dB at 1 km.
- $\mu$-metal is the sole engineering-grade shielding material for the ELF band: A 2 mm box wall provides 30 dB (recalculated 30.54 ✅).
- Intrinsic attenuation of building materials is limited: A 30 cm concrete wall yields only 0.005 dB at 7.83 Hz (original 4.6 dB was excessive); the measured shielding of 1.6–6 dB in buildings stems from localized high-conductivity anomalies caused by rebar cages, piping, and elevator shafts, not the walls themselves—this explanation is unaffected and further reinforced.
- #23 Iron Rule logic for “A(dB) < Background-10 dB prohibits entry into E1” holds (threshold is independent of $\delta$ values).
- #18 T4 (Structural Void) classification remains unaffected.
❌ Values Requiring Correction
| # | Location | Original Value | Corrected Value |
|---|---|---|---|
| 1 | #16 $\delta$ table (Concrete/Basalt/Granite rows) | Unit labeled m |
Unit should be km (or value ×1000) |
| 2 | #16 $\delta$ table ($\mu$-metal row) | 1.6 cm @1 Hz | 1.59 mm (off by factor of 10) |
| 3 | #16 A table (“Basalt 100 m”) | 270 dB | 0.48 dB |
| 4 | #16 A table (“Granite 100 m”) | 27 dB | 0.048 dB |
| 5 | #16 A table (“Steel plate wall 5 mm”) | 83 dB | 8.4 dB |
| 6 | #16 A table (“Concrete wall 30 cm”) | 4.6 dB | 0.0046 dB |
| 7 | skin-depth-reference-table $\sigma/\mu_r$ label column |
Rows biased by 10–100× | Correct per §3 table |
| 8 | #22 A threshold | $\sigma\ge10^{-2} \rightarrow \ge10$ dB | $\sigma\ge10^{-2} \rightarrow$ 4.8 dB; $\ge10$ dB requires $\sigma\ge10^{-1}$ or thickness $\ge2$ km |
| 9 | #25 $\delta$ column (A/C categories) | 67 km / 670 km | 1.8 km / 18 km |
| 10 | #23 / #26 / #33 (670 km and 1600 m) | — | 18 km ($\sigma=1e^{-4}$) or 57 km ($\sigma=1e^{-5}$) |
6. Corrective Tables (Proposed Drafts for Direct Adoption)
6.1 Revised δ Table (7.83 Hz, Organized by σ rather than Material)
| σ (S/m) | δ(7.83 Hz) | A(dB) at 1 km Uniform Medium | Thickness for 3 dB Attenuation | Thickness for 10 dB Attenuation | Corresponding #22 Category |
|---|---|---|---|---|---|
| 1e-1 | 569 m | 15.27 dB | 196 m | 655 m | Category A |
| 1e-2 | 1.80 km | 4.83 dB | 621 m | 2.07 km | Category A |
| 1e-3 | 5.69 km | 1.53 dB | 1.96 km | 6.55 km | Category B |
| 1e-4 | 17.99 km | 0.48 dB | 6.21 km | 20.7 km | Category C |
| 1e-5 | 56.88 km | 0.15 dB | 19.6 km | 65.5 km | Lower Bound of Category C |
Interpretation: The statement “1 km mountain attenuation of X dB” is meaningless without a specified σ—across four orders of magnitude in σ, the A(dB) value also spans four orders of magnitude for the same thickness.
6.2 Revised Thresholds for #22 Categorization
| Category | σ (S/m) | A(dB) at 1 km | Thickness Required for 10 dB | Measurement Value |
|---|---|---|---|---|
| A | ≥ 10⁻¹ | ≥ 15 dB | 655 m | High |
| A′ | 10⁻²–10⁻¹ | 4.8–15 dB | 655 m–2.07 km | Moderate (requires ≥2 km mountain or lower threshold to 5 dB) |
| B | 10⁻³–10⁻² | 1.5–4.8 dB | 2.07–6.55 km | Low |
| C | ≤ 10⁻⁴ | ≤ 0.48 dB | > 20 km | None (serves only as a zero control) |
7. Tooling and Process Reinforcement
New reusable tools added in this round: 08-ops/_tools/skin-depth-recompute.py (set executable with chmod +x; verified via execution).
python3 skin-depth-recompute.py table # Print baseline recomputation table
python3 skin-depth-recompute.py delta --f 7.83 --sigma 1e-2
python3 skin-depth-recompute.py sigma --f 7.83 --delta-km 670 # Invert to derive σ for validating label consistency
python3 skin-depth-recompute.py thickness --f 7.83 --sigma 1e-2 --db 10
python3 skin-depth-recompute.py check-md <file.md> # Verify δ/A tables cell-by-cell within md files
Recommended integration into pre-writing workflows (alongside citation-verify.sh, forming a dual-gate mechanism for Pool 4)
1. citation-verify.sh — Citation verification (confirm authenticity of PMID/DOI)
2. skin-depth-recompute.py — Numerical verification (confirm consistency between δ/A values and declared parameters)
The failure mode in this round shares its origin with the OMOP sub-line in Pool 3: table values are cyclically referenced without independent recomputation. The issue in Pool 3 concerns “misattribution of PMIDs,” whereas the issue in Pool 4 concerns “mismatch between δ values and labels”—both represent cases of self-replicating citation chains lacking independent validation.
8. Integration with Existing Research Topics
| Research Topic | Relationship |
|---|---|
| #16 δ Table | Primary object A of this audit |
skin-depth-reference-table |
Primary object B of this audit (already established within the laboratory framework) |
| #22 σ Stratification | The threshold for Category A requires revision per §6.2 |
| #23 Magnitude Filtering SOP | The rule holds; calculation examples require correction; it is recommended to incorporate this tool into Step 3 |
| #25 Category A Candidates | The δ column requires recalculation |
| #26 σ Database | H4 values require correction (conclusion direction remains unchanged) |
| #33 Geometric Stripping | F3 values require correction (judgment direction remains unchanged) |
| #18 T4 | Unaffected |
| #24 Steady State vs. Event Period | The thresholds of 0.05/0.1 Hz originate from Sátori 1996 and are independent of the δ table; thus, unaffected |
9. Evidence and Limitations
Evidence Level: C (Recalculation via Engineering Formulas + Literature Parameter Ranges)
- High Confidence in Recalculation: The formulas align with standard engineering electromagnetics conclusions; parameters are derived directly from stated values within the original texts; the scripts are reproducible. Deviations reaching $10^2$–$10^3$ times far exceed the range explainable by rounding or parameter intervals.
- Not Addressed: Verification of literature sourcing for $\sigma/\mu_r$ (i.e., “Is the $\sigma$ value of $10^{-4}$ for granite itself correct?”)—that constitutes a separate audit layer not covered in this round.
- Not Modified: Any existing article body text. The correction table in §6 is proposed as a draft.
- Not Published: This document has not been synchronized to the
lab/cnsite;review_status: draft. - Parameter Sensitivity: A tenfold difference in $\sigma$ results in a $3.16$-fold difference in $\delta$. Therefore, the correction table in §6 should also include a $\pm 3$-fold uncertainty band and should not be read as precise values.
Verification Anchors (DOI, Crossref cross-checking title and first author)
| # | DOI | First Author | Source | Purpose |
|---|---|---|---|---|
| A1 | 10.1190/1.9781560802631.ch3 |
Palacky G.J. | Electromagnetic Methods in Applied Geophysics (1988) | Classic chapter on rock resistivity ranges (source layer for $\sigma$) |
| A2 | 10.1029/gm013p0469 |
Madden T. | Geophysical Monograph Series (2013) | Electrical conductivity structure of the crust/upper mantle ($\sigma$ magnitude) |
| A3 | 10.1046/j.1365-246x.1999.00707.x |
Eisel M. | Geophys J Int (1999) | Macroscopic anisotropy of crustal conductivity ($\sigma$ stratification) |
Verification Anchors (PMID, E-utilities esummary cross-checking)
| # | PMID | First Author | Source | Purpose |
|---|---|---|---|---|
| B1 | 24131394 | Sirav B. | Electromagn Biol Med 2014 | ELF transformer magnetic field exposure measurements (⚠️ Original text mislabels as “Burchard et al. 2014”) |
| B2 | 36681118 | Martel J. | Biomed J 2023 | EMF-circadian rhythm review (⚠️ Original text mislabels as “Girgert et al. 2023”) |
| B3 | 28654641 | Binhi V.N. | PLoS One 2017 | Low magnetic field/shielding biology review |
| B4 | 36676419 | Cheng Y. | Materials (Basel) 2023 | Low remanence materials and magnetic field homogenization |
⚠️ Incidental Finding (Citation Layer): PMID annotations in #16 show author mismatches in 2 cases (B1, B2), sharing the same failure mode as pool③ OMOM sub-lines (PMID is valid but attribution is incorrect). These corrections are recommended to be addressed together in §5.
10. Pending Joe’s Decision (Red Light)
【Pending Joe’s Decision】
- Item: Whether to finalize the correction of the pool④ $\delta$ tabulated values into existing articles (including the
skin-depth-reference-tablealready deployed on the lab line). - Blockage Reason: Involves revisions to the text of 5 existing articles plus 1 piece of content already online; classified as publicly visible materials (Red Light).
- My Recommendation: Plan A (Recommended) — Prioritize fixing threshold #22 and column #25 $\delta$ (judgment layer, impacting sample selection decisions); add a “unit correction” note to table #16 rather than rewriting the full text; submit corrections separately for the $\sigma$/$\mu_r$ label column in the
skin-depth-reference-table. Plan B — Release only this audit report and correction table; leave article text unchanged pending unified handling in the next cycle. - Non-blocking tasks that can proceed: This audit report and recalculation tool (completed in this round); integrate
skin-depth-recompute.pyinto SOP Step 3 of item #23 (feasible in the next round). - Duration: Does not impede progress on remaining pool④ topics; items #24 and #18 remain unaffected by this issue.
File Status: draft v1
Current write-gate correspondence: acquire WB-FIVEPOOLS → write → release
Disclaimer: This article compiles traditional knowledge and scientific literature for comparison and research-design discussion only. It is not medical advice and cannot replace professional diagnosis or treatment. Effect sizes, frequency ranges and exposure conclusions cited here are largely inferences at the research-report level, and individual circumstances vary widely. If you have any discomfort or health concerns, please consult a physician.